Learning Ukulele 50 Sites Top 50 Ukulele Sites Argapa Ukuleles - one size louder: 12/1/07 - 1/1/08

Monday, December 31, 2007

Bending jig in the making


Everything has to happen during short bursts of activity, since my kids need attention. In the background you can see my dad teaching my son to sharpen knives, while I'm glueing parts together.

Sunday, December 30, 2007

Mistake


Wood. A very good reason to love MDF. Hopefully it won't affect the result too much. I got scared though, had I been slightly more careless I would have had fewer fingers to play the uke with.

Router


With the templates screwed on, I use a router to get the parts identical. This proved to be both dangerous and difficult.

Jigs


Rough cut with a jigsaw. Haven't bought a bandsaw yet, and I'll have to cope without one.

Thursday, December 13, 2007

Drawing


Designing my tenor using CAD software. I must have looked on 1000 ukes on the internet, so the design is not really my own.

Wednesday, December 12, 2007

Wood 4


For some reason someone has traced the contour of a jumbo-sized uke on the board. With a bit of luck, each piece should be enough for one soprano and one tenor. 12 ukes...

Wood 3


Grain seems tight and good. This is cedar.

Wood 2


Also some basswood for kerfing.

WOOD 1!


At last and finally! Today my soundboards arrived.