Lazarus

Crackle… static… hello..? Hello? Is anybody out there?

What’s this. A long forgotten stash of wood, unearthed and almost ready to dig into. 

It is now stored in the loft above the new workshop. 

DID YOU HEAR [read] THAT? The new workshop. Look at it and marvel.  

Next post won’t take three years. I promise. 

New guitar project, with Li

Hell-o all you wonderful readers of ye olde blogge. I am not dead, but my bank accounts will be soon. The efforts and the cost of building the new homestead are sick. But it is moving in the right direction and before you know it a ramshackle workshop will be set up. 

Anyway I wanted to show this. My daughter Li wants an electric guitar and my answer was HELL YEAH YOU WILL GET A GUITAR. In the pic she’s drawing one and I’ve laid out parts and hardware that I happened to have lying around. 

Reinforcing the bridge patch

Remember the nasty, chewed-up bridge patch? That was more like a wide brace of soft spruce? I sure did, and wanted to glue a thin piece of maple so the ball ends of the strings have something more solid to pull against. 

First pic shows me doing a smart thing: I held a piece of paper under the brace and rubbed the edges of it so they marked the paper. Then I could measure the width more easily, outside the guitar. 

I went back and forth a bit, marking the new patch through the holes so it would end up in the right position. Here you can see the size and shape I worked out by guessing. 



Smart moment number two: I glued a caul on the clamp, and built two tiny ramps of masking tape so they were higher towards the ends of the caul. That way when I tighten the clamp it’ll give pressure to the entire maple patch instead of just in the middle. 

The patch was temporarily fastened to the caul with masking tape and superglue, and wiggled into position. My wife helped me because my hands were too big once the clamp was in. 



A caul on the outside and left to dry for 24 hours. 



Gut shot that shows we did well. Next up is drilling holes in the new patch and also in the new bridge, to get that positioned correctly over the existing holes through the soundboard.